You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4528 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Tuesday, January 31st 2006, 7:27am

by Wet_Boots

Install with pipe horizontal, so debris drops to outlet for drainage. For drip, you might look for a finer mesh than 100, depending on what sort of drip you're using. For regular sprinklers, the 100 is a good choice to protect valve operation, and 'clean-water' rotor heads.

Monday, January 30th 2006, 11:08am

by rghash

Filter installation question

This is perhaps a dumb question, but I'm thinking of installing the 1" Vu-Flow 100 mesh stainless filter right before my PVB (split off main line before it goes thru water softener unit). Irrigation is entirely drip hose for landscaping. Water is from 500' well (hard water, occasional small sand) - I don't really perceive a water quality problem right now, but adding a filter seems like cheap insurance for all the drip hose...

Do this filter have to be installed in the vertical position? (ie, pipe being horizontal). Can they be installed horizontally? I've got two vertical pipes going to/from my PVB and the rest is below ground and ideally I would install the filter oriented horizontally on the vertical pipe.

I'm just not sure if that would affect functionality, the filter description doesn't mention orientation...