You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4534 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Thursday, January 19th 2006, 4:23am

by Msddouglas

The complete system is 2" pvc and a filter is installed. Thank you for you response to my question.

Monday, January 16th 2006, 8:51am

by Wet_Boots

Friction losses in a suction pipe will greatly reduce pump output. You need to compare the original suction line to the longer line, using a friction loss table. If the original suction line was, say, twenty feet long, and an inch-and-a-quarter in diameter, the newer hundred-and-twenty-foot suction line would probably need to be a two-inch diameter pipe, to give you equivalent performance. If you can switch the nozzles in the sprinkler heads, you might regain the original coverage. You'll have to run the system longer, but if you have the time, the lawn won't know the difference.

Monday, January 16th 2006, 5:19am

by drpete3

could be. Does the intake have a filter? What size pipe is your intake?

Saturday, January 14th 2006, 9:54am

by Msddouglas

Lost water pressure

Our sprinkler system uses lake for it's water supply. The lake has gone down so far that we have extended our suction pipe over 100 ft. to reach the water. Is this the reason we've lost pressure to our sprinker heads? We were able to run 6-7 heads at a time, now we are only able to run (3) heads at a time. Thanks for your input.