You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4785 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 8 posts

Friday, November 4th 2005, 2:55pm

by Wet_Boots

Weight and power are desirable features in tough conditions. A Vermeer LM-42 or a Ditch-Witch 410sx are the heavyweights for lawn plows that can fit through a gate. The Case Maxi-Sneaker has their dealer network (for parts) behind it, even though it's a bit less heavy and powerful. Burkeen also makes a vibratory plow comparable in size and power to a Sneaker, but with no dealer network to speak of.

Friday, November 4th 2005, 3:06am


would you recomend a model of plow?

Friday, November 4th 2005, 2:35am

by Wet_Boots

If no one in your area has a vibratory plow, then the homeowners don't have a choice. Simple. If you have the maintenance chops, then by all means get a plow and work with it. In sandy loam, you may not have any plowing problems to speak of. In tougher areas, you want the plow blade to be in near-new condition. Worn blades and tough ground are hard on plows.

Thursday, November 3rd 2005, 4:48pm


but to the homeowner looking at what is going to happen (damage) to his yard if he had the choice to choose between a plow and a trencher to me a plow would be more apealing. have you done any plow work? right now we are in the industrial trenching buisness, 25-175 hp trenchers, but have no plow experience. i can get a plow for what i think is cheap. i would have thought that trenchers would have more maintainance. does plowing in require a lot more work? what is more cost effective after te machine is paid for?

Thursday, November 3rd 2005, 1:46pm

by Wet_Boots

Vibratory plows cost real money, and they have the ability to vibrate themselves to pieces. Many machinery rental yards will not carry vibratory plows. So, where a lot of installs are done on new construction, a trencher will be used much more often, especially when the system piping is all-PVC.

Thursday, November 3rd 2005, 11:52am


what im saying is why dont the do it for ease of installation? no dirt to backfill and minimal sod distruption? does it cost more to plow in line? what gives? thanks

Thursday, November 3rd 2005, 6:45am

by Wet_Boots

Warmer climes see the use of PVC pipe, instead of poly tubing, which is almost always plowed in. If the ground itself doesn't freeze solid, water can be drained from the above-ground plumbing, and winter temperatures won't break anything.

Thursday, November 3rd 2005, 4:09am


why not plow?

there is no one in north west texas that plows in their pipe why would this be? freeze depth is 3-6 inches, the ground is sandy loam soil, is this a silly question? are there any precautios that need to be taken for freezing or is that not a problem. i have seen it get down to 15 degrees for 6 hours and hoover around 20-2 all day thank in advance