You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3293 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Friday, October 14th 2005, 7:14pm

by jcruce13

ssgumby,
Im not sure if that is the best method. I would check to see what pump you have and whats its rated. I would also check with the company that put in the well to find out how much you can pump out of it during a time period. I think I remember when the guy put in our well he said that we hit an underground spring or something and we had a very highflow rate.

but he also mentioned something about if you draw more than this per day or hour the well could go dry... so you might want to check with the people who put in the well to make sure you are good to go... just a thought..


Thanks
-John

Thursday, October 13th 2005, 5:49am

by ssgumby

Help with design.

I am going to attempt to install my own system. Last year we had toro online do a design for us, but it was horrendous to understand. I want to start from scratch.

I have a well. To get my water pressure and GPM, should I measure the water coming out of the tap outside? I have a tap off my pressure tank that bypasses the water softener, should I use this?

I have read a TON here and it has been very helpful!!

Thanks in advance.