You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3213 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Tuesday, October 11th 2005, 10:54pm

by jcruce13

dewayn,
I would just dig and do it right... I have found the shortcutting saves time now but will always cause more problems later and you will have to fix it at the worst possible time. My advice cut the line and put in a proper T on it... In this case you will only dig once...


Thanks
-John

Friday, September 16th 2005, 3:57am

by Tom

you need a 3/4" slip fix repair coupler

Thursday, September 15th 2005, 12:51pm

by dewayn

schedule 40 pvc tap

I need some advice on how to tap 3/4 inch pvc lateral line for adding another sprinkler head. In my area the town prefers schedule 40 for all water lines. I am trying to avoid digging too much of the line for a slip x slip tee. I bought some blazing saddle tees but the pipe is too thick and the stem won't penetrate the pipe. is there any other tap that will work for this procedure. How much pipe will i need to dig up if i am forced to use a slip x slip tee. Can a person use a compression tee in this situation thank you for your help!