You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4640 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Tuesday, October 4th 2005, 2:17pm

by Wet_Boots

There is no such device, so far as I know. If the line is pressurized, turning the ball valve on and off isn't going to change that. If you can find a "stop and waste" type of ball valve, or maybe a "curb stop" valve with a drain that opens when the valve is off

Monday, October 3rd 2005, 1:37pm

by plumberbrett

what type of device do i need

i have a commercial customer that needs a 2" galv. water line in a freeze prone area installed, i am going to install a ball valve at the start of the line, but want a device that when i turn the ball valve off, will automaticly relieve pressure and drain this line so itdoes not freeze and break. what kind of device will i need.
thanks every one