You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4653 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 6 posts

Tuesday, September 27th 2005, 3:37pm

by sosinc

Thanks guys for the replies!

Tuesday, September 27th 2005, 7:05am

by Wet_Boots

Buried means covered with dirt, either in direct contact with the device, or in a box or pit where the cover of said enclosure is covered with dirt. Such a practice would never pass an inspection. (that matter of access, as you pointed out)

The RPZ in an underground pit is a trickier situation, and I'd not lose sleep over upgrading an old DC valve in a dry deep meter pit to an RPZ, even if I wouldn't choose to do it that way in a brand-new installation.

Tuesday, September 27th 2005, 4:49am

by HooKooDooKu

Wet Boots,
Time to learn me some more :)

Obviously I was busy typing up my response when you already posted yours and obviously our statements are in conflict.

What is wrong with burying a DC (assuming that it's in a meter box where it can be accessed for testing).

(Let's not even get into my statements of burying an RPZ. I've read that it can be done, but only in very special situations, say the side of a hill where the meterbox has a 6" drain hole that discharges out the side of the hill... or something like that).

Tuesday, September 27th 2005, 4:44am

by HooKooDooKu

Double Check Backflow can be buried and it's height relative to sprinkler heads doesn't matter. But your local building codes may not allow it.

The height of an RPZ relative to sprinkler heads doesn't matter either, but they pretty much have to be installed 1' off the ground (they have a relief valve of some sort. Part of the way the unit works is that if it can not maintain the pressure drop across the device that insures the water can't backflow, water squirts out of this vent to keep the water source protected. But if unit becomes submerged, this venting could fail and allow water to backflow. So you can't bury an RPZ unless it's a very special situation where the "hole" has a certain level of drainage such that it's impossible for the unit to become submerged.) RPZs are pretty much the cadillac of backflow devices, and when properly installed would be allowed just about anywhere.

Tuesday, September 27th 2005, 4:32am

by Wet_Boots

No backflow preventer can be buried, period.

Monday, September 26th 2005, 2:56pm

by sosinc

Can backflow be bury?

Can you bury a Backflow in the ground below the height of a sprinkler head?