You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3254 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Friday, September 23rd 2005, 2:51pm

by brochild

OK
I will re-think the nozzles aroung 10 GPM
I also wanted to change to the Hunter PGP rotor for economical reaons only.
Am I risking anything?

Thursday, September 22nd 2005, 12:55pm

by Tom

15 gpm is pushing a little to much water for your set up. You would be much better designing for 10 gpm.


Wednesday, September 21st 2005, 4:43pm

by brochild

Hunter nozzle for Hunter I-20

I am new to sprinkler design and would appreciate any help that I can get selecting the proper nozzle for the Hunter I-20 rotor.

I have a design that requires 6 rotors. Originally I wanted to use Orbit Voyager II, but a local dealer talked me into Hunter, because of its superior quality. I have 1 full circle, 2 1/4 circles and 3 1/2 circles.
For the Orbit rotor, I was told to use nozzle #2 for the 1/4 circle, #4 for the 1/2 and #6 for the full circle to keep my precipitaion rate the same.
My main line is 3/4, my meter size is 5/8 and my pressure is 65 PSI. So I believe that gives me about 15 GPM total. For those 6 Hunter I-20 rotors, I need to know waht is the proper nozzle to use on each (full, 1/4 and 1/2) so that I don't exceed 13 GPM