You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4697 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Sunday, August 7th 2005, 2:55pm

by Wet_Boots

All the necessary parts for the electric-valve portion of the R711 can be had in a new Irritrol 205TF valve. As for the vacuum breaker part, that's tougher. The poppet from their currently-produced 2711APR antisyphon valve might fit.

Sunday, August 7th 2005, 10:11am

by lafave

<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Wet_Boots</i>
<br />Kit, no. Parts, yes.
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">

What parts are available? I need a diaphram, needle, solenoid, solenoid o-ring and the rubber that the needle sits in...unsure what that is called.

Saturday, August 6th 2005, 4:57pm

by Wet_Boots

Kit, no. Parts, yes.

Saturday, August 6th 2005, 2:44pm

by lafave

Richdel 711A Valve Rebuild

Can anyone tell me if there is a rebuild kit readily available out there for a Richdel 711A valve?

Thank you,