You are not logged in.

  • Login
  • Register

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2844 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Friday, August 5th 2005, 4:16am

by wmhallii

<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by RidgeRun05</i>
<br />Are you sure you have a proper start time programmed? Are you running a certain program, such as A, B, or C? Double check your programming for automatic operation to make sure everything is set up properly. If you still have no automatic operation, you probably have a bad controller.
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">

I did as you suggested, checked and reset my programing and it is working. Thank you!

Thursday, August 4th 2005, 2:06pm

by RidgeRun05

Are you sure you have a proper start time programmed? Are you running a certain program, such as A, B, or C? Double check your programming for automatic operation to make sure everything is set up properly. If you still have no automatic operation, you probably have a bad controller.

Thursday, August 4th 2005, 9:51am

by wmhallii

RainBird ESP-6 Controller

I have a RainBird ESP-6 Controller and with power on, it will not turn on my sprinkler's when set in the auto mode. If I select a zone and press manual the sprinkler's for that zone will come on. My sprinkers work from a well pump. The pump seems to be working very well as it will operate my sprinkler when actuated in the manual mode of operation.

Bad controller???

Please help me trouble shoot this problem.