You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3399 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Friday, August 5th 2005, 8:04pm

by RidgeRun05

You will find all of the replacement parts you need on this page
http://www.rainbird.com/shoppingv5/shopdisplayproducts.asp?id=590&cat=ESP%2DTM

Transformer: Plug-In Transformer for all ESP-TM controllers.

Plug in Class 2 transformer
Model: AC2650650
Input: 120V AC, 60Hz, 24W
Output: 26.5V AC, 650mA

Fourth item down on the page. Hope this helps.

Friday, August 5th 2005, 9:00am

by Rthorn01

It is a ESP -TM Series Controller from Rainbird.

Thursday, August 4th 2005, 2:04pm

by RidgeRun05

Make sure it is the same brand as the controller, in this case Rainbird. Most generic transformers will work as long as they are 24 VAC, but for some reason the Rainbird controllers seem to have some issues if you use something other than a Rainbird transformer. What type of controller do you have? I will locate a transformer online for you.

Thursday, August 4th 2005, 1:37pm

by bobw

The transformer that plugs in the wall converts the current to 24v AC.

Thursday, August 4th 2005, 10:05am

by Rthorn01

New Plug in

i have a Rainbird Professional controller in one of my rentals. When I went to start the sprinkler system this yr I found that my tennent had disconnected the plug in into the unit and had accidentally thrown it away. I need to get a new plug in. What are the specs for a new plug in? Everything else on the unit should be fine. it is just not getting power.