You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4880 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Monday, August 1st 2005, 7:04pm

by RidgeRun05

Sounds to me like a shorted wire as well. Better get the shovel back out and see if you can locate any broken wires in the area you dug in. If you broke the PVC water line, you'd know it, trust me.

Monday, August 1st 2005, 6:10pm

by Wet_Boots

popped breaker = short circuit (look for a wiring fault or shorted-out solenoid)

Monday, August 1st 2005, 5:13pm

by krs

Circuit breaker pops

I have a 4-zone Richdel system installed on the house I just bought. Prior to doing some digging the system was working perfectly. Since that time whenever the zone in the area where I dug is selected the circuit breaker pops whether in manual or auto mode. If I happened to hit the pvc is there a pressure senser that would pop the breaker or is it likely a wire I may have hit?