You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3789 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Wednesday, April 7th 2004, 6:04am

by aquamatic

Just need to close up the testcocks-
You mentioned that you had the install last summer. How long is your warranty for with the installer??

If you decide to manage your system yourself and something breaks ytou might just void out your warranty. Replacement parts can run you more expenive than having your contractor in-

Tuesday, April 6th 2004, 4:07pm

by Tom

The testcocks have a "slot" that is most likely open. You can use a flatblade screwdriver to close the valves. When the slot is perpendicular to the testcock it is closed.

Tuesday, April 6th 2004, 5:57am

by maako

Bad FEBCO 765 Backflow Valve?

I'm about to be unemployed and don't want to pay to have someone come out to fire-up my system for the summer. It was installed last summer and winterized by the installer in the fall. All of the outside valves were left half-open through the winter. Plastic caps for both Testcocks were off though the winter. Today I opened all the valves, from the water supply and both sides of the backflow valve. Controller off, with all solenoid valves closed. I left the testcock caps off. When I open the inlet valve, water sprays from Testcock 1. When I plug Testcock 1, water sprays from Testcock 2 and from under the canopy. When I plug both testcocks, the system seems to pressurize, but there are small leaks coming from both testcocks.

Questions 1: What's wrong? 2: For summer use, should the Testcocks be plugged with the plastic caps? 3: There are winterization instructions all over the web, but I can't find instructions on how to "summerize" the system - know of any?