You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4732 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Saturday, July 9th 2005, 3:57pm

by Wet_Boots

I expect your taking it apart removed any obligation on Hunter's part to do anything whatsoever. Those things are made in China, and are probably replaced, rather than being repaired. You can always ask. Likely, you will start over with another controller, but check your wiring and valve solenoids for shorts, just in case.

Saturday, July 9th 2005, 3:20pm

by bombertennis

SRC Failure

I have had this SRC 900i controller about a month. It failed a couple of days ago and when it would not respond I took it apart. Resister R28 was fried to say the least. Is this fixable or just a symptom? Will Hunter fix this?