You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4733 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Monday, July 4th 2005, 7:20pm

by avu3

Thanks again for the info. All the local place had was a Orbit controller. I bought the cheapy ($20) 4 station model. It does every other day watering and allows different times for each zone/valve, so its good enough for me. It even supports a rain detector, if I want to add one.

I figured for $20, it was disposable if it didn't fix the problem, or if it wasn't adequate for the job. It fixed it, and it seems adequate.

Thanks again,

Monday, July 4th 2005, 7:01am

by avu3

Thanks. No reset button in it anywhere. Unplugged overnight, powered up, same thing. I'm off to the local hardware to find a replacement. I'll let you know how it goes and what I end up with.


Monday, July 4th 2005, 3:09am

by Wet_Boots

If the old controller doesn't have a reset button, there isn't anything you can do besides power down and wait. (pull the backup battery out as well) - Strictly for cheap, from a good name, is Hunter's EC-400i controller.

Sunday, July 3rd 2005, 10:20pm

by RidgeRun05

Yeah, there is one more thing you can do...toss that controller in the garbage, its shot. I would suggest either the Hunter SRC if you only have 4 stations, or a Rain Bird ESP series controller.

Sunday, July 3rd 2005, 2:36pm

by avu3

Controller programming error - Hardie 6100


I found one other reference to this system in a search, hopefully someone has a suggestion for me. I know Hardie is out of business.

I just purchased this house and the system supposedly worked when I bought it, but the power was off for a bit so the controller was erased. Its a Hardie 6100 with 4 stations.

When I power it up step 1 is to set the time. Instead of showing me the time that it is, or a flashing 12:00, the device shows me two numbers on opposit sides of the display which seem to be a run schedule (station # and run time) but adjusting that you can actually change the current time. No station activates when you power on.

I can't do any of the other setup steps - the dial to select what you are doing doesn't do what the function indicates. For example I can't set days or run schedules, I just keep getting that same display OR an on/off option. I tried turning everything to off in case one of the programs is running, but it doesn't seem to help.

I've inspected the wiring and manually actuated the valves and the system seems ok. I bought a new 9v battery and left the system without electrical power for more than the 10min recommended in the manul.

Is there anything else you'd suggest before I buy a new controller?