You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3408 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Thursday, May 19th 2005, 4:28am

by drpete3

yes it does. First read http://www.irrigationtutorial.com/ this will help a lot. anyone who is contemplating a system self installed or not would benefit. It will make you a smarter consumer. I also agree with using products from sprinkler warehouse.

Wednesday, May 18th 2005, 6:10pm

by joe1023

does it matter how many heads go on one line ?

Monday, April 11th 2005, 6:29pm

by RidgeRun05

I would suggest that you use contractor grade parts, not parts from home improvement stores. You should be just fine with 65 PSI

Monday, April 11th 2005, 4:41am

by HooKooDooKu

www.irrigationtutorial.com

Sunday, April 10th 2005, 8:15pm

by pdxbuysell

pressure/GPM question

Hi

Newbie here thinking of installing a sprinkler system. I measured the water pressure at the nearest hose bib to the water meter. Pressure was 65 psi. Pipe going from meter to house was 1". Tried the water pail test too. GPM comes to around 7.5.

I am thinking of using Orbit parts. Their design software said GPM was kinda low.

I thought I made a mistake in measuring the pipe cos most people I talked to said they that 3/4" but I checked it again and its 1".

Can someone tell me what I should be loooking at pressure or GPM. Will I be ok with what I have?

What size pipes should I use for main line, header lines and lateral lines?

Thanks![?]