You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5051 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Sunday, April 24th 2005, 4:26pm

by RidgeRun05

There really is no predefined size for a water line so to speak. Your supply line from your valves to your sprinkler heads will vary depending upon your water pressure and gallons per minute. Generally the range is anywhere from 3/4" to 1 1/2", but there is no certain size pipe that is always used. Once you know how much PSI you are working with and how many GPM your water supply puts out, you can then determine the appropriate size for your piping.

Sunday, April 24th 2005, 2:51pm

by Wet_Boots

What does the job most economically is what's used, and that depends on many variables that are yet unknown.

Sunday, April 24th 2005, 5:14am

by sosinc

water line size?

What size water lines are more commonly used when supplying water from the value to the sprinkler head?
Is a 3/4" or a 1 1/2" more commonly used?