You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Wednesday, September 12th 2018, 9:31pm

by mrfixit

Does it happen on every zone or just zone number 1? Try starting 2-3-4 manually.

Wednesday, September 12th 2018, 8:54am

by melodique

Sprinkler system stopped working

System worked one day and then wouldn't turn on the next. Controller is a hunter src 6 zone, of which we run 4. When the timer comes on, we hear the click at the pump and may or may not get a second or two of the pump running and water coming out of the sprinklers. It then immediately shuts off and the controller switches from the zone timer to the time of day. No rain sensor that I know of.
We checked the breakers, changed out the fuse on the controller, and checked the voltage on the controller. Voltage is good on all lines though one of the two black wires (not zones) has no power, but maybe it's not supposed to? That's as far as this girl's knowledge extends on all things electric. ;). Any ideas? I think I'm supposed to test voltage near the pump but not sure what I am looking for. TIA