You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3494 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Thursday, April 7th 2005, 9:06am

by nestors

Put one in a 6" box , two in a 12" box this will give you room if you need to repair later on .

Thursday, March 3rd 2005, 5:02pm

by RidgeRun05

Generally you can fit one standard valve in the 6" circular valve boxes. The jumbo boxes I believe you are talking about are the 12" rectangular boxes, and I wouldn't put more than 4 valves inside that. The spacing is really your discretion, but I would leave enough room so that maintenance on the valves isn't a pain in the rear. I would also suggest the threaded valves over the slip on, strictly because if a valve goes bad and you need to service or replace it, you're not having to cut out the slip on valve in an already cramped valve box. With the threaded you can just unscrew it.

Tuesday, February 15th 2005, 8:10am

by ejzajac

Designing manifold

1. Any standard guidelines for spacing between PVC T's (1") for a valve manifold using irritrol 1 " valves?
2. Reccomendations for number of valves (1") in standard box, jumbo box?
3. Preferences between threaded vs. slip on valves?