You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4980 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Sunday, October 31st 2004, 1:36pm

by nestors

The best thing to do is install any valve with a flow control then install a prv pressure regulater valve then install a filter which is usually used for drip systems you will have no problem then.

Nestor's Sprinklers & Lighting

Friday, August 20th 2004, 10:37am

by billingsleyj
fill it out or find a local sprinkler retailer that specializes in irrigation; Not a Home improvement store or a plumbing store. There are valves specifically made for low flow situations you just have to find them.

Wednesday, August 18th 2004, 5:49pm

by landscaper11

low volume problem

are there any valves that are designed to close under very small amounts of flow, such as 0.2 gpm. thing is I have installed a misting system that uses very little flow (like 0.2 gpm, as you can imagine a standard electric solenoid valve from rainbird or toro will not close due to the lack of flow. any ideas, technical or otherwise would be helpful.[8D]