You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Sunday, July 22nd 2018, 5:12pm

by Wet_Boots

Can you explain why you made this switch? What make and model of pump did you replace?

Sunday, July 22nd 2018, 3:59pm

by Kgc1973

Replacing a jet pump with a non-jet pump

I replaced my jet pump with a non-jet pump and having pressure problems. I have a 2 inch PVC with a one and a quarter inside of the 2 inch going into the well, do I need to take out the one in a quarter inch pipe since my new pump is not a jet pump? Please any advice