You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 7 posts

Monday, July 23rd 2018, 7:50pm

by Irrigationnewbie

Thanks WetBoots and MrFixIt. I have made adjustments to resolve the dry spot

Thursday, July 19th 2018, 10:09pm

by Wet_Boots

I'd put a sprinkler at 2:30 pm of that top arc. I see a brown spot happening there.
Where there is only single coverage from the smaller full circle head? I'd lose that full circle in favor of a half-circle on the border, completing a head-to-head layout on the back border, and maybe alter the half circle next to the "future driveway" into two part circle heads next to each other, with their total arcs making for the same half-circle arc of the replaced head, and with one of the heads having increased distance, to reinforce coverage where the full-circle head was removed.

Tuesday, July 17th 2018, 12:05am

by mrfixit

I'd put a sprinkler at 2:30 pm of that top arc. I see a brown spot happening there.

Monday, July 16th 2018, 10:40am

by Wet_Boots

Rotor heads with 3/4-inch connections are going to be more durable. The only popup rotors with 1/2-inch connections that are likely to become commonplace are the MP Rotator types, which would fit your application, given the shorter spray distances you have.

Monday, July 16th 2018, 6:47am

by Irrigationnewbie

Thanks wetboots! That is the way I was leaning, but wanted the confirmation.

Sunday, July 15th 2018, 7:16pm

by Wet_Boots

Go with the I20 heads

Sunday, July 15th 2018, 8:31am

by Irrigationnewbie

Short radius I20 vs PGJ

I'm in the process of designing my irrigation system. In total it is about 13,000 sqft, with the bulk of the radius for the sprinklers being being 18-30 feet.
With my goal being long-term reliability, should I go with I20's over the PGJs, or make it easier (and cheaper) on myself and go with the PGJs?