You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Wednesday, June 20th 2018, 12:44pm

by mrfixit

You can buy another valve box of the same size and place it on top of the existing box. That'll make it taller.
As far as the flooding valve box. That might be another issue. Where's that water coming from?

Wednesday, June 20th 2018, 11:44am

by Yankeesnick8605

Irrigation valve box low

I purchased a 26 year old home with UGS, there are 2 valve boxes which are set about 1’-1.5’ from the foundation. The system has 5 - 1” valves total, they are in a bit of a low spot with the top of the boxes being about 4” below grade. When the sprinklers run both boxes completely fill with water, is there any way I can fix this issue with out digging up all the valves and lines and re grading? Thanks in advance!