You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Saturday, June 16th 2018, 5:49pm

by mrfixit

Is the flow control turned down too far?

Saturday, June 16th 2018, 3:04pm

by ConfusedCOS (Guest)

Low Zone from House

Hey everyone, hope someone can guide me here.

I have 7 zones, all but one are working which is zone 3. Water will flow electronically and manually but not enough to pop the sprinkler heads up.I have dug up the lines and no leak, I have replaced the valve entirely to include the solenoid, and I have increased the psi from 50 to 70. All other zones electronically and manually work and when solenoid is removed the water shoots up two feet where as other working zones the water shoots in 15 feet when solenoid is removed.

Any direction is welcome.