You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Wednesday, June 13th 2018, 3:40pm

by Wet_Boots

Look for a partially-closed valve in the supply chain.

Wednesday, June 13th 2018, 10:21am

by macktb

Backflow pressure

Having some issues with water pressure in my system. I placed a pressure gauge on the first test cock on the backflow preventer and get a reading of 50PSI, as soon as i open a valve it drops down to 17/18PSI and stays there. Seems that is way to much of a drop? The run from the meter to the backflow device is only about 2 ft and i don't see any puddling of water so i'm not sure if it's a leak? Any comments would be appreciated.