You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5060 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Monday, August 9th 2004, 5:46am

by HooKooDooKu

As far as how tall the risers should be, you just have to make sure the valve is 6" (or is it a foot) above the highest spray. As for spacing, I've heard 6" appart so that you have room to make repairs later.

Saturday, August 7th 2004, 5:51am

by mlehrer

Valve Manifold Design

I am looking to install my own large sprinkler system. I have had a professional landscape person design the irrigation system and now I am off to install. I have searched the web for information and design ideas for building the valve manifolds. I am using Rainbird anti-siphon 1" valves. Does anyong have specs on how tall the risers should be and how far apart each valve should be? Just looking to see what other have done. I do want to keep the valve groups in valve boxs so I thing 4 or 5 to a large box might work?
Any advice is appreciated. Thanks;