You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3815 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Saturday, July 10th 2004, 7:18pm

by nestors

You can also use teflon paste in a can .

Nestor's Sprinklers & Lighting

www.NestorsLandscape.com


Wednesday, July 7th 2004, 4:21am

by bobw

Use 8-10 wraps of teflon tape on the threads screwing in to the valve to prevent any weeping/leaking/etc

Tuesday, July 6th 2004, 12:17pm

by RVLI

Your best bet would be to use Teflon tape.

Tuesday, July 6th 2004, 11:37am

by stevensje

Teflon Tape

I bought the 2400TF Irritrol 2400 Series Electric Globe Valve with Flow Control (1 inch Threaded Inlet/Outlet).

Do I need teflon tape on the thread or will screwing in the threaded pvc be ok.

Thanks.