You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5112 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Friday, June 25th 2004, 3:52am

by aquamatic

You have a short on the wires for those zones. Do you have extra wires in the box. Change over to those and test

Thursday, June 24th 2004, 4:56pm

by Sunturtle

valve electrical problem

I need some advice. I'm dealing with a commercial 5 zone system. When the clock powers zone 2 it blows the fuse. With zone two connected to the clock it also blows the fuse when zones 3-5 call for power. With zone 2 taken off the clock (wire removed), zones 3-5 work normally. Any ideas?