You are not logged in.

  • Login
  • Register

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3265 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Tuesday, June 15th 2004, 6:07pm

by radical

Could be low pressure. Check the "Kicker Arm" to make sure it's clear of debris. Push down on the head and turn the head to the left and right quickly - possible grit or sand in the seals. Check the spray nozzle to see if something is lodged in the opening. This doesn't work, take the piece of crap back to the store and get a Rainbird 15103-09 Impulse Head. They are the best impulse heads ever made.

Sunday, June 13th 2004, 10:00am

by jt67

Pulsating sprinkler won't rotate


I just installed a brand new Nelson pulsating sprinkler, and I want it
to rotate 180 degrees angle. When I first turn the water on, it rotates
a couple of times, and then it stay put.
Any idea why it doesn't rotate? I don't see anything blocking its way
This is a metal pulsating sprinkler I bought at the Orchard supply store

any suggestion would be appreciated

Thanks
Tony
ttk67@yahoo.com