You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5112 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Friday, June 18th 2004, 1:13pm

by Tom

You would only use 1 less head if you triangulated the spacing.

The problem becomes the squared off ends-you have to water 6 feet past the edge to obtain triangular spacing.

Wednesday, June 16th 2004, 3:45am

by BTanner

Thanks, should be installing my system this weekend. Wish me luck!!!

Tuesday, June 15th 2004, 1:25pm

by radical

You would use less heads and still obtain head to head and matched precipitation if you triangularly spaced your heads on 12' centers.

Tuesday, June 1st 2004, 12:00pm

by Tom

You will not get even watering, i.e. you will have to water longer to provide enough water along the side without heads resulting in overwatering the side that the heads are on.

Ideally, you should use 12' nozzles spaced 12' apart on both sides of your strip.

Sunday, May 30th 2004, 4:12pm

by BTanner

Strip design question 12'x240'

Planning to use Rain Bird 1804 Sprays @ 30psi with 15H and 15Q nozzles spaced every 10' only on one side. Will it work? If not, any suggestions?