You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Wednesday, April 18th 2018, 8:03am

by Wet_Boots

No backflow protection is what's definitely wrong. Antisyphon valves could replace the existing valves. (if they can be located so as to be higher in elevation than the sprinkler heads)

Tuesday, April 17th 2018, 8:46pm

by mrfixit

I'd replace those three valves then turn the water back on.
Hook the wires up to the new valves.

Tuesday, April 17th 2018, 2:02pm

by mrfixit

You need a pro to look at your system. It's missing parts and wiring. The water is also shut off.

Monday, April 16th 2018, 7:35pm

by RLNguyen

Sprinkler system doesn’t work & I don’t know why!

I’m a noob when it comes to this issue because I’ve never dealt with it before and I need help! I can’t explain what’s wrong but I have pictures and I’m hoping someone could help/guide me through the process.