You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5148 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 6 posts

Sunday, May 16th 2004, 9:50am


Thank you for the information

Tuesday, January 27th 2004, 10:16am

by aquamatic

I picked up my sSnetry from my local John Deere Landscapes distributor.
or you can order from

Friday, January 16th 2004, 6:33am

by Rays Sprinklers

im not really sure.....if there arent any on sprinker warehouse you can check some local irrigation distributers......

Sunday, January 4th 2004, 10:26pm


and where might I purchase a sentry flow meter? I can't seem to find one listed on the net.

Monday, November 24th 2003, 12:50pm

by Rays Sprinklers

i dont use the meters, because all around here we have basically the exact same pressuer at every house that differs with about 2 GPM and about 10 PSI so it really doesnt matter when designing. The Sentry Flow gauges are way better and if you are going to be installing systems quite a bit and need testing then that would be the one to go with.

Monday, November 24th 2003, 2:45am

by aquamatic

PSI/FLow Gauges: TORO v. Sentry Flow Meter

I have gone through 2 Toro pressure gauges in the past 6 months. I have heard that they are junk and have learned the lesson myself. Either the gauge gets stuck or in my last case the casted gate valve cracked open.

I was told about the Sentry Flow Gauges that are a bit costly.

Can someone give me some feedback on what they are using the measure flow and static pressure when designing a system