You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5142 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Wednesday, May 19th 2004, 8:51am

by bgeddes

The following link has 1" barb x 1" barb x 1/2" FPT Tees:

Tuesday, May 18th 2004, 7:25pm

by cuberoot

Automatic Drain Valves

As a novice, I was wondering what the best way to install auto drain valves is and where they should be placed along the system. Should there be one on the main feed line and one each on the zone valves?

I did not see any poly T's on the site which are 1" barb X 1" barb X 1/2" female pipe thread which would accept a Blazing Industries auto drain (1/2" male pipe thread). Are poly T's availabe in the configuration I mentioned above and just not sold on this site? Could you turn a Blazing saddle upside down and connect the auto drain valve to the saddle?

Thanking You,