You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5359 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Monday, May 17th 2004, 2:39pm

by Gullman

I have a six zone system. Its programmed correctly for all six to run in succession. I just had the system opened for the season and they replaced two solanoids. Now zone 3 runs only when turned on manually. Numbers 4 and 6 don't come on at all. The others are fine. My service guy says I have really rusty water and my valves keep getting stuck. He says I need to replace the whole manafold and all valves. The controller and well are new. The manifold could be 15 years old. What should I do

Sunday, May 16th 2004, 5:02am

by nathanko

Do I need to buy a new valve or can I replace the diaphram.

Friday, April 30th 2004, 5:43pm

by aquamatic

Its most likely your diaphram that is sticking.

Friday, April 30th 2004, 4:14pm

by nathanko

Intermitant valve problem

I have a toro series 294 valve that I think is sticking. Sometimes the zone shuts off and other times it continues to run. Can I purchase a solenoid for this valve, or do I have to replace the whole unit.