You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Saturday, February 10th 2018, 12:38pm

by mrfixit

You could put a plug in the hole instead of a riser with a cap. It would be flush with the fitting.
Isn't there an adjusting screw on top of the sprinkler where you can turn it off?
I've never thought to do this before but you could take the nozzle off, plug it up somehow, use a paper towel or something, then screw the nozzle back on. I know that's jerry rigging but it would do what you're asking.

Saturday, February 10th 2018, 4:59am

by tanhaichooi

Is there a "dead" spray head?

I have a few pop up sprinklers (Richdel 100 series) in my lawn. Certain lawn area has changed its function, thus I do not need that particular sprinkle. Instead of digging it up and put a "pup" piece and cap it (then it will not be flush with the ground level).
I was looking for a "dead" spray head so that I can pull the head up, unscrew the exiting head and replace with the "dead' head. It may still pop-up, but at least there will be no water shooting out. The sprinkler will still be flush with the ground when not turn on. And in future , if I want to use it again, I just reverse.