You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 486 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Friday, November 24th 2017, 6:24pm

by Thoss29

That’s probably it, thanks! I’ve just been using random sprinklers from my drawer of parts.

Friday, November 24th 2017, 4:22pm

by mrfixit

You're turning them down too low. Nozzles are designed to be turned down a max of 20%.
So if you have 15 foot nozzles and you're trying to spray them 8 feet, it's not going to work.
They'll do exactly as you described.
Brass nozzles can be adjusted down low and stay put but plastic doesn't work well.
You need to buy new nozzles. They come in various distances. 17, 15, 12, 10, 8, 6, 4. Depends on the brand.

Friday, November 24th 2017, 3:38pm

by Thoss29

Low flow after adjusting

I have one zone that barely trickles water out. I adjust them with sprinklers on and get them where I want. But after the sprinklers shut off, the next time they come on water barely trickles out again.

Any suggestions? Thanks!! ?(