Reply
Dear visitor, welcome to SPRINKLER TALK FORUM  You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.
Attention: The last reply to this post was 4126 days ago. The thread may already be out of date. Please consider creating a new thread.
The last 6 posts
The best answer is that you want the pipe to be as short as possible from the valve to each head. Of course to accomplish that, you'd might have to run 6 pipes strait from the valve to the heads.
So the comprimise is to run as many tees as needed so that the total pipe used is minimized. (i.e. the pipe should be in H and T shapes, Not S shapes.
Excellent, that is the way I understand the fittings charts. If you can help, I got one more questions reguarding pressure. Is it better to connect all the heads in one run of poly pipe, or is it better to split the zone up with a tee into two halfs?!? Meaning, if i have six heads in a zone, should they all be connect in one run after the valve, or should they be split into two, three head sections after the valve?!?
Yes, that's how I understand the tables/charts to work. The charts for the fittings indicate what the equivilent in feet for a fitting, then you use the pressure loss for the type pipe you are using.
So as an example, let's assume that for a given gpm, the tables tell you that a 90 elbow = 2ft and pressure loss is 5psi/100'.
You run a pipe across the front yard for a distance of 50', then you turn 90 to the right and go strait for 10', then you turn 90 to the left and go strait for a distance of 5' (your trying to go around an obstical), then you turn left for another 90 and go back 10', then turn 90 to the right (so that you are back on your previous course). You then have to go another 40' to reach where ever you are trying to go.
Total distance is 50 + 2 + 10 + 2 + 5 + 2 + 10 + 2 + 40 = 123ft
123ft * 5psi/100ft = 6.15psi pressure loss.
I have found tables, but i'm not sure if i understand them correctly. Example, say you loose 2 psi for every 100 feet of pvc pipe, would the pressure loss for a pvc 90 be something like (2/100=.02psi assuming that a 90 is equal too 1 foot of pvc pipe)?!? Am i understanding this correctly?!?
I don't fully understand your example, but I can tell you that there are charts that will indicate pressure losses through various fittings. It's usually expressed as an equivilent number of feet of pipe.
As an example, I think a typical 90 elbow is equal to adding an additional 1 foot of pipe. You'd have to find charts for the pipe you are using (for the real answer might be something like 3ft).
Pressure Loss Question
Is there a major pressure loss when you have a barbed 90 or tee in a zone, or any kind of 90 or tee?!? Example: If i come off the first head with a tee and goto another head on the left and 2 on the right.
Example: HHH
 
 
 H

Valve Manifold
Thanks.