You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3931 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Tuesday, January 20th 2004, 2:31am

by SprinklerGuy

More than likely bad diapragm in the valve in question. go buy a valve just like the one you have and replace the guts and top and solenoid of your valve with the new parts. This should help.

Friday, January 16th 2004, 7:07am

by lyndarowecampbell

I have the same problem...i have tried to turn the valve on manually however I still only have a stream of water come out and the same thumping...what should i do???

Friday, October 31st 2003, 12:24pm

by Rays Sprinklers

Thats called water hammer? What is your pressure? That occurs whent he pressure is high, and the valve is quickly opening and closing..it may be a valve failure. Open the valve box and turn the zone on and see what happens

Sunday, October 26th 2003, 1:17pm

by littlemanschulz

thumping noise

when a certain zone is on, the sprinkler heads bob up and down without working. there is a small amount of water coming out, but it is not spraying...just a steady stream out of the head. also there is a thumping noice under ground in the pipes at about every 5 seconds. what is my problem? Thank You