You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3669 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 6 posts

Wednesday, April 7th 2004, 12:25pm

by drpete3

When you use the light bulb analogy have you ever heard of using a potatoe to get the base of the light out by pushing it on to the broken bulb? Is there any thing that you have that is firm that you can wedge into the hole and twist to try to unscrew the broken threads.

Wednesday, April 7th 2004, 12:15pm

by Rico Moreno

Quoted

<i>Originally posted by drpete3</i>
<br />This happened to me once and I jammed one side of a pair of robogrip pliers and started twisting and I got the threads out.



I am not terribly handy or familiar wit tools....Where would I get robogrip pilers and how much do they run? My brother-in-law is suggesting I cut out the problem areas and replace them with new pvc pipe and heads.....either way they will both be firsts for me.

Thanks
Rico

Tuesday, April 6th 2004, 6:45am

by drpete3

This happened to me once and I jammed one side of a pair of robogrip pliers and started twisting and I got the threads out.

Tuesday, April 6th 2004, 5:24am

by Rico Moreno

The threads are broken off inside the pvc pipe and there is nothing to grab off and twist out. It's kind of like when a lightbulb bets broken while it's still in the lamp and you have to use a potato half to unscrew it. It *****.

Monday, April 5th 2004, 1:59pm

by aquamatic

What brand heads do you have? Did you just break up the top end. You might get away with just twisting off and replacing the guts on the housing.


Monday, April 5th 2004, 8:45am

by Rico Moreno

Broke 3 sprinkler heads

I have snapped 3 sprinkler heads off with my lawnmower in the past year. How do I get the broken part out of the PVC pipe? Do I have to cut the whole section of pipe out and start again?

Help me, I have a fountain bubbling in my front yard because I can't put a new head on, or get the old one out.