You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4018 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Saturday, October 25th 2003, 10:44am

by Rays Sprinklers

Normally if there is a problem with the controller all zonzes or more than one fail. Check to see that zone one is wired correcty, then head out to the green box in your yard where the valves are. Find the valve that activated zone one, by manually turning them on. Make sure that both wires of the valves are correctly connected, and did not fall apart. Then if the problem still is there, unscrew the top of the valve,a dn pull out the "guts" clean everything out, (of course turn the water off before doing this, or youll drench yourself) then put everything back together. Depending on the valves you have will determine how you unscrew them. Let me know what happens

Friday, October 24th 2003, 3:27pm

by mac

rainbird ESP-8 one of my stations not working

I've got 8 stations programmed and never had a problem (in last 6 yrs) with my Rainbird ESP-8. After noticing a certain section of my grass dried out (for station #1), I noticed that although the display shows it's on (with 100% water pressure at the scheduled 20 minute cycle), nothing's happening. Yet, all my other stations work perfectly. I've tried switching to control B and still nothing. I'm baffled here. Any suggestions would be greatly appreciated. Thanks.