You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5352 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Tuesday, October 28th 2003, 3:20am

by Sshado

Yes it is a Toro, I also checked to see if it was lined up.

Basically, the T was on the bottom, then the Spring was on that and the doughnut? was in the Spring.

This is the link to the one I have:



Saturday, October 25th 2003, 10:41am

by Rays Sprinklers

what kind of pressure vacuum breaker did you have? I know the good (expensive) ones do not do this, but the homedepot ones do, example: TORO. Iam assuming that the blowout tee is before the PVB. What kind do you have? You could unscrew the top and check that everything inside is lined up. Let us know!

Friday, October 24th 2003, 4:12am

by Sshado

Blowing out system - problem with PVB

I was blowing out my system and everything was going good until the Pressure Vacuum Breaker seemed to stop sealing up. Air just escapes there now and I can't get the rest of my lines blown out.

Any suggestions?