You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 479 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Wednesday, July 26th 2017, 9:07pm

by WayneB

Maybe you got some debris in the manifold while replacing valve 2. Take 3 apart and look for a clogged port.


Thank you. As soon as I can find valve 3 I will. Valves are randomly buried.

Tuesday, July 25th 2017, 11:59pm

by mrfixit

Maybe you got some debris in the manifold while replacing valve 2. Take 3 apart and look for a clogged port.

Tuesday, July 25th 2017, 10:29pm

by WayneB

Station 3 will not run after replacing station 2 valve

I have a 7 zone station. Recently I had a problem with zone 2 not running. After replacing the solenoid and diaphragm I replaced the entire valve. A Rain bird CPF-100. After installing the new valve station 2 now operates successfully but now station 3 will not run. Stations 1, 2, 4-7 run fine. Station 3 ran correctly before I replaced the valve in station 2. When I try to run station 3 a few heads have water trickle out but that's all. I tried removing 3 heads and run to no prevail. Do I have air in the line or anything else? Thank you.