You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 610 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Wednesday, January 18th 2017, 2:01pm

by Wet_Boots

Oops, this seems to have been overlooked.

The answers depend somewhat on the burial depth of the existing line, but some of the details hold true in any scenario.

The added line is going to be potable water, just like what is in the line you will tee off from, so it needs no specific backflow prevention, since the water will be potable up to and through the added hose spigot. It will be at the hose spigot that you apply a hose-bib backflow preventer.

For just hose usage, you get by with one-inch pipe for the new line. The shut-off you want to include is definitely underground, with a valve box and cover to give you access.

Sunday, January 1st 2017, 3:01pm

by Thomas D

Install line from well water supply

I want to run a pvc line about 200 ft with Jose spigot at end.
The water supply for house is from well and comes out of the well to house in a 1 1/4 inch pvc.
I was going to T off the main line but am unsure if I should run 1 inch or just stay with 1 1/4 inch?
Also, I want to add a shut off valve after I leave the main line. Since it's pvc should I keep the shut off underground?
Lastly, where should I have the backflow preventer? Is having it at the point I hook up a hose to the new line ok or should it by closer to the main line?
Thanks in advance.