You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 883 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Saturday, August 20th 2016, 11:19pm

by mrfixit

Yep no water's getting through the nozzle.
It could be clogged up. I use a dental pick to clean them.
It might be turned down too low with that tiny screw on top.
Could be the fiter's totally clogged up. Does it even have a filter?
You can't adjust the distance of spray without a filter in place.
With spray nozzles they're designed to be adjusted up to 20% in water reduction. If you adjust it down too far while the sprinkler is running, the next time it comes on nothing or very little will come out. You'd need to step down a size in nozzle. 15-12-10-8 or whatever.
If all else fails replace the nozzle with a new one.

Saturday, August 20th 2016, 7:53am

by SunCoLawns

clogged nozzle

Saturday, August 20th 2016, 7:11am

by arnagas

Hi. It is a 4" 570 series pop-up adj pattern toro sprinkler from home depot

Saturday, August 20th 2016, 3:41am

by mrfixit

Do you have a picture of the sprinkler or the model number?

Friday, August 19th 2016, 4:25pm

by arnagas

sprinkler head pops up but no water

I have 2 sprinklers next to each other. One is working just fine. The other one is not spraying any water
I have removed the filter and cleaned it. I have checked that there is water pressure (head pops up & plenty of water in the line)

I have flushed the line for a couple of minutes by removing sprinkler and letting the water run (plenty of it comes through)

what could my issue be?