You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 505 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 8 posts

Wednesday, July 27th 2016, 8:51am

by hi.todd

I agree it sounds like sabotage.

A pro can render a system useless with very little effort.

I concur with MR FIXIT!, The Woodlands Texas, no Filter.

Wednesday, July 27th 2016, 2:02am

by mrfixit

That's really weird. I highly doubt they traveled 2 miles. One screw traveling 2 miles and getting stuck in there I suppose could happen but mutiple screws I highly doubt unless there's hundreds of them in there. Maybe they dropped a whole box in there.

It's possible someone did it on purpose via the backflow device.

Tuesday, July 26th 2016, 10:45pm

by marcob

These were about 4mm thick, short screws. They did a ton of work on the water system in the last couple of years, but that was a couple of miles away.

In the last 7 months I had to replace 7 of the 9 diaphrams which were all messing up, that's why I was thinking about placing a filter in front to prevent stuff from clogging up my valves and my heads.

The screw which I found in my main valve after one of my zones was leaking non stop. (replaced the diaphram in that zone as well)...

Tuesday, July 26th 2016, 8:01pm

by mrfixit

Finding foreign objects inside a valve like screws that didn't come from a valve is super rare.

Do you have a picture of the screws?

I don't believe you need a filter. If there's another screw it'll show itself sooner or later.

I doubt you're getting screws through the city water. hmm You are on city water yes?

Did you have any plumbing work done recently where the main line was cut open? Plumbers like to drop things down in there from time to time.

Tuesday, July 26th 2016, 1:18pm

by Wet_Boots

If it ain't broke, don't fix it.

Tuesday, July 26th 2016, 11:29am

by marcob

Woodlands, TX.
This is what it looks like today.



Tuesday, July 26th 2016, 10:28am

by Wet_Boots

What's your location? What backflow preventer is in place?

Tuesday, July 26th 2016, 10:03am

by marcob

Any comments / suggestion on this 10 year old valve setup?

This system was installed in 2005, and start to have more and more issues with it (Picture was taken during install).

I believe it's time for a redo, any suggestions, comments?


Couple things:
Found screws INSIDE the valves :) so maybe time for a filter?
Also, have a Rachio controller attached to it (which I love), any suggestions on flow sensors?
Would like to reorganize the valves so at least they are in a straight line, absolutely no clue why they did it like this...