You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3876 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 10 posts

Wednesday, February 18th 2004, 10:01am

by drpete3

Sorry no experience with those.

Wednesday, February 18th 2004, 4:05am

by paterjb

Thanks for the advice. I'll add a mainline drain. Any thoughts on the Weathermatic master control valve and the Flow-clik?

Thanks

Wednesday, February 18th 2004, 2:49am

by drpete3

If the reason you are going to use end of line drains is in case of accidental freezing then you must also install a mian line drain. I am not saying this is bad but I just wanted to point that out and it would be installed between the main valve and your manifold. This is how mine is.
Now the next thing I want to point out is that think about what it would take to break a pipe on your system. If all pipes are buried 6-10 inches deep then the ground would have to freeze that deep provided that none of your system is above ground ie backflow preventer? I dont know what it would take to freeze the ground that deep but I would bet it takes more than 10 hrs of 20 degree weather for example. Just somthing to think about

Wednesday, February 18th 2004, 12:57am

by aquamatic

Flow Click is a Hunter product. I'm sur Sprinkler Warehouse carries or can order for you

Tuesday, February 17th 2004, 7:11am

by paterjb

I think I'll go with the Weathermatic 1.5" 21000 commercial series valve as my master control valve, 0 psi loss up to 15 GPM along with the Flow-clik placed after the master control valve. I'll still use drain valves in case of an unexpected freeze and I haven't blown out the system yet. Sound any good? Where can I buy the Flow-clik? Thanks

Monday, February 16th 2004, 4:07pm

by aquamatic

Rhode Island freezes up also. No one uses drain valves here. Definately consider using the Flow Click- It could save you money and damage to your property.


Monday, February 16th 2004, 9:14am

by paterjb

I am in frozen Northern Illinois, but I plan on blowing out the system in the late fall anyway. Maybe I should skip the auto-drain valves and the master valve!!!

Monday, February 16th 2004, 9:00am

by aquamatic

Do you have freezing winters in your area. If so are you trying to avoid compressed air in the winter? Around my area no one uses drain valves.
As for the master- You got a point, if you want to spend the extra money go for it. Be sure its a heavy duty master that will not leak as easily

Monday, February 16th 2004, 5:37am

by paterjb

Aquamatic: I haven't installed my system yet. Still fishing for the best advice. I'm saying that if my automatic drain valves have already drained, and I have a leak in one of my zone valves allowing water to leak by, then the master valve would be one more stop gap to ensure I'm not wasting water.

Monday, February 16th 2004, 5:05am

by aquamatic

. Do you mean drain valves at the end of your line?? If they are leaking- thats fine- Thats what they should be doing as long as you have fully closed valves. You might also have some sand or object stuck in the valve that causes a void in the seal. Open up and check each one. One way to check for any leaks if you have city water. Is to make sure that all water is shutoff through out house. Then go to your meter and check to see if your flow meter is spinning. Now this of course can also mean you have a small leak somewhere else in the house ( faucet). If you have a shut off after your T'ed off for the sprinklers, SHut this off, Now you should only have pressure on the sprinkler line.