You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 849 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Sunday, February 21st 2016, 7:29pm

by Wet_Boots

try to describe your supply in more detail - source, distances, and sizes of pipes and water meter, and if there is a pressure reducing valve in the supply

Friday, February 19th 2016, 2:35pm

by ryanl (Guest)

LOW GPM

I am still in the developmental stages of my project, but I am currently at a stand still. I started to run the usual tests and realized that my GPM is very low. My psi is a pretty standard 50 psi, but GPM is only 4. It seems that everyone has at least 15+ GPM for their setups. I cannot find a lot of information about GPM being so low, only about low psi. From what I've seen most standard spray nozzles are putting out at least 2-3 GPM. So does this mean I'm pretty much stuck with using 2 sprinklers per cycle?