You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1075 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Saturday, January 2nd 2016, 8:03am

by Wet_Boots

You almost certainly have a great deal more water available than 4-5 gpm. You need to find the amount of flow that will have the pump running continuously.

Thursday, December 31st 2015, 12:56pm

by bencfitness

Direct link to the picture with the pump.

Thursday, December 31st 2015, 11:15am

by bencfitness (Guest)


If you hold control and zoom in with your mouse scroll wheel you can read what I typed in the images. I am sorry it is so small.

Thursday, December 31st 2015, 11:12am

by bencfitness (Guest)

Valves, piping and pump question.

I will try to keep this simple. I just bought a home and am trying my
own irrigation. The pump is a 2 1/2 hp that pulls water from 45 ft down. I
live in Florida. The pump was setup with 4 faucets and not for
irrigation. I am a bit confused with how to go about hooking my valves
I made to it considering there are so many different faucets. I will
include pictures. Also I read that I need a pressure vacuum breaker
and valve union. I googled these but did not get anywhere. ( I have
mapped out my yard and based on 4 1/2 gpm 45 psi I will do 3 zones with
3 4 4 sprinklers ) (32sa rainbird rotors most will be at 180-360
degree rotations ) ( I am only doing the front yard at this time)

<img src="" wcf_src="[url='']" alt="a>" title="a>" />

<img src="" wcf_src="[url='']" alt="a>" title="a>" />