You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3798 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 9 posts

Tuesday, March 2nd 2004, 3:50am

by GreenlawnMI

I used the dura manifolds all last summer they work great.....dura also has pre made ones.....like 3, 4 and 5 i think ....so you can throw 5-7 valves on one manifold and only have to connect a couple of elbows instead of putting a bunch of tees together.

Monday, March 1st 2004, 3:46am

by Tom

Ray- the only thing with those tees you mentioned is the difficulty in getting the valves to line up with the tee. It seems you can never get it perfectly straight and have a good leak proof seal.

Sunday, February 29th 2004, 8:06am

by Rays Sprinklers

Dura makes a "manifold tee" which i use. They have a 1" threaded male adapter for the valve and each tee glues into each other. They are made of schedule 40 PVC. Using these you still have the strong hold of the glue, and a permanant manifold

Friday, February 6th 2004, 8:48pm

by aquamatic

DURA Plastics makes the manifold I use. They work great for me, Priced right, no leaks and makes for a good looking install.

www.duraplastics.com

Sprinkler Warehouse sells them: www.sprinklerwarehouse.com

Friday, February 6th 2004, 4:14am

by Tom

The problem with jar tops are the threads. The threads have a tendency to leak if they aren't clean before reassembly. I prefer valves with screws.

As far as prebulit manifolds, I believe Sprinkler Warehouse sells such a contraption.

I think the best way to build a manifold is with pvc slip fittings. The only threaded connection you will have is the male adaptor to each valve and the threaded connection to your mainline.

Thursday, February 5th 2004, 3:56pm

by Rays Sprinklers

Use the Irritrol2400T it is the number one selling jar top valve around. ........that way if eomthing goes wrong within the valve you can yunscrew the guts leaving the valve and manifold in place.

Monday, January 26th 2004, 4:15pm

by rain man

If you use a jar-top valve, you can unscrew the top to replace the solenoid on the valve w/out removing the housing.

rain man

Monday, January 26th 2004, 7:28am

by drpete3

I think most install permanent(without unuion). Most of the time if a valve fais the guts will be replaced from a new valve and just use the casing that was there.

Saturday, January 24th 2004, 7:13am

by bilagaana

Connecting valves to manifolds

I saw the earlier thread on pre-built vs. diy manifolds. At this point, I'd just as soon buy pre-built if I could find such a thing (which I haven't). I intend to use the existing valves, which have threaded connections, and as much of the existing manifolds as I can salvage.

My question is: Is it recommmended to install adapters and unions so that the valves can be removed for service, or do most installers permanently connect--thread the adapter into the valve and glue it to the pipe?

Thanks, again.