You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5377 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Sunday, September 28th 2003, 3:49am

by DIYer

Thank You!

Saturday, September 27th 2003, 11:54am


It doesn't matter, just make sure there are two from the one soleniod on one wire to the timer, and two to the other.

Saturday, September 27th 2003, 5:17am

by DIYer

Fertigator Wiring

I recently installed a fertigator M1 injector. In order to fit it in the valve box more easily, I disconnected the top portion from the bottom. Now, I dont remember how the top and bottom injectors were wired together (they are both colored black on each injector). Does it matter? If so, how should they be wired?